Camera Presets - TANDBERG F1 D13353.02 User Manual

TANDBERG 8000 MXP
Example: You cannot see what the far end is writing on their whiteboard.
Choose Move Camera from the main menu. Choose Far End from the dialog box. Use
Zoom and arrow keys to move the far end camera. Press OK when done to go back to
normal.
See also 3.13.3 Far End Control

3.10.3 Camera Presets

Use Camera Presets to easily vary between specific camera positions. When you are in a
call, presets are available directly on the number keys on the remote control. Press a number
to activate a Camera Preset. You can save presets 1-9 presets by the corresponding number
for 1 second. Note that Camera Presets does not work when you are in an input field (then
you need the numbers for dialing). Camera Presets are also available from the Camera
Presets menu under Control Panel.
Each Camera Preset is able to store:
 Main Camera position (pan, tilt, zoom).
 Video source.
 Audio source selection (see chapter
How to use Camera Presets:
1. When you are in a call, press a number on the remote control. The camera will move
to the corresponding position (or video source).
2. Alternatively, open the Presets menu in Control Panel. Choose Display Presets and
select a preset with arrow keys and OK.
3. Presets are deactivated when you move the camera manually with the arrow keys.
46
for more about Far End Control functionality.
4.5 Audio for further details).