Appendix 7 - TANDBERG F1 D13353.02 User Manual

6.7 Appendix 7

Using the file system
It is possible to access a file system within the TANDBERG system by using ftp:
DOS- ftp <IP-address of system>, or
window:
Web- ftp:// <IP-address of system>
browser:
Description of the different files:
all.prm all settings in the system (including directory)
dir.prm directory entries (up to 200 entries)
event.log logs fault situations etc.
sw.pkg the system software
globdir.prm file containing up to 400 entries. These entries can not be edited from the
system, but can be edited as a text-file.
Files accessible only by 'ftp get /tmp/snapshots/xxx.jpg' or 'http://<IP-address of
system>/tmp/snapshots/xxx.jpg':
main.jpg Snapshot of current stream if MultiSite.
local.jpg Snapshot of selfview.
farend.jpg Snapshot of decoded stream if point-to-point.
duovideo.jpg Snapshot of the encoded stream if transmitting DuoVideo, the decoded
stream if receiving DuoVideo.
Custom logos
 Go to the folder where your logo is located.
 Type "ftp <IP-address of your local system>".
 Go to the user folder, type "cd user".
 Upload the logo, type "put <startup.jpg>".
The new logo will be displayed the next time you restart your system. Logo max size: E2 and
above: 704x480, B7 and above: 320x200, file-format: jpg. If the file is too large, no logo will be
displayed.
6 Appendices
145