TANDBERG F1 D13353.02 User Manual page 156

TANDBERG 8000 MXP
The pinout of the S/T interface is:
PRI Pinout
Pin-3 TX+
RX+
Pin-4
Pin-5 RX-
TX-
Pin-6
PRI ISDN Interface:
To connect the system to PRI, use the ISDN cable provided by TANDBERG (or a standard
PRI cable).
The pinout of the E1/T1 interface is:
PRI Pinout Crossover
PRI cable
Pin-1 TIP RX 4
Pin-2 RING 5
RX
Pin-4 RING 1
TX
Pin-5 TIP TX 2
Note! TANDBERG recommends always using category 5 cabling.
V35 Interface:
V.10 (RS423).
150