Tcm Error Messages - Symbol MC9000-G Product Reference Manual

TCM Error Messages

TCM validates the cells in the partition table when the Execute button is clicked. Cells highlighted in
red contain an error. Partition loading is disabled until all errors are corrected.
Error
Failed to build images: flash file
system DLL not loaded!
Failure finding directory xxx
Failure creating volume
Failure adding system file to
image
INVALID PATH
Nothing Selected To Build
Illegal ESS ID
Disk Full
Target Disk Full
Hex file is READ ONLY
Error opening the file xxx with
write access
Failure creating binary file
Hex File To load is missing or
invalid
Could not locate terminal name in
TCM.ini file
Incorrect disk sizes in TCM.ini file The total disk size specified in the script does not match the total disk size defined in
INVALID DIRECTORY
Table 11-3. TCM Error Messages
TCM could not load the DLL required to build images for the targeting flash file
system. Reinstall TCM or recover the DLL.
Building process failed because directory xxx was not found.
Building process failed because a certain disk volume could not be created.
Build process failed because TCM failed to add a certain system file to the disk image.
The path for the image file to build is not valid.
In the Config Build window, no item is selected to build.
In the Build ESSID Partition window, no ESS ID was entered or the ESS ID entered was
illegal.
TCM failed to create Hex image file at the selected path. Check available disk space.
Build process failed because TCM failed to add file to the image of a disk volume.
Remove some files or increase the disk size.
The Hex image file to be created exists and is read-only. Delete the existing file or
change its attribute.
TCM could not open file xxx with write access. Check if file is in use.
TCM failed to open/create an intermediate binary file.
In Load Terminal window, the file selected to load has invalid status.
While loading the Script Properties window, TCM could not find the TCM.ini section
corresponding to the terminal type specified by the current opening script. Either
TCM.ini or the script file is invalid.
the corresponding TCM.ini section. Check if the script is corrupt or the TCM.ini has
changed after the script was created.
In Script Properties window, the selected System File Path is not a valid directory.
Mobile Computer Configuration
Description/Solution
11-21