Scan Parameters - Symbol MC9000-G Product Reference Manual

Scan Parameters

Use the Scan Parameters window to set the scan parameters.
1. Double-tap the Ctl Panel icon - double-tap Scanner Settings - double-tap Scan Params. The
Scan Parameters window appears.
2. To change any item in the Scan Parameters column, use the up
to select the item.
3. Use the left
Parameter value options.

Scan Parameters

Code ID Type
Scan Type
Local Feedback
WAV File
Beep Time
Beep Freq
Figure 3-59. Scan Parameters Window
and right arrow buttons to increment the value.
Table 3-11. Scan Parameters
None, Symbol, AIM
Forgrnd, Bkgrnd, Monitor
True, False
See Figure 3-60 on page
the WAV file listing and Increment to move forward on the
WAV file listing. Tap OK to select the WAV file.
0-5000 in increments of 100ms
2500-3500 in increments of 10
and down
Table 3-11
Values
3-65, Tap Decrement to move back on
3-63
Settings
arrows
list the Scan