Scan Led Indicator - Symbol MC9000-G Product Reference Manual

2-40 MC9000-G Product Reference Guide for Embedded Windows® CE .NET
3. Position the mobile computer horizontally or vertically (as shown in
on the orientation of the tag.
4. Pull the trigger.
5. An audible beep sounds, by default, and the Indicator LED bar flashes green one time to
indicate the tag was decoded successfully.
6. Release the trigger.
Tag decoding usually occurs instantaneously. The mobile computer repeats
the steps required to read a tag as long as the trigger remains pulled.

Scan LED Indicator

The Indicator LED bar on the mobile computer provides a visual indication of the scan status. See
Figure 1-1 on page 1-3
MC9000-G Series:
Off
Solid Red
Solid Green
MC9000-G RFID:
Off
Flash Once Green
for the location of the Indicator LED bar.
Table 2-12. Scan LED Indicators
LED Status
Not scanning.
Laser enabled, scanning/imaging in process.
Successful decode.
Not scanning.
Successful decode.
Figure 2-19), depending
Indication