Reader Parameters
Use the Reader Parameters window to set the scanning read parameters. The reader parameter
settings are dependent on the type of scanner used, either a laser scanner or an imager. See
3-8 on page 3-60
for laser scanner settings and see
Laser Scanner Reader Parameters
1. Double-tap the Ctl Panel icon - double-tap Scanner Settings - double-tap Reader
Parameters. The Reader Parameters window appears. To change any item in the Reader
Parameters column, use the up
2. Use the left
3. Tap OK to return to the Control Panel window.
Figure 3-57. Reader Parameters Window
and down
and right arrow
buttons to increment the value.
Table 3-9 on page 3-61
Imager Reader Parameters
arrows to select the item.
Settings
Table
for imager settings.
3-59