Symbol MC9000-G Product Reference Manual page 223

Table 5-4. Gemini RFID Window Icons / Menus
Icon
Launches the Locate Tag window, see
Launches the Program Tag window, see
Clears the tag list, see
Saves the complete list of tags, see
Previous and Next buttons appear on the menu when read tags exceed the amount of
tags that can fit in the tag list display.
Tap to display the previous page.
Tap to display the next page.
File and Mode menus, see
By default, when a tag is successfully decoded the mobile computer beeps. Tap the
icon to toggle between beep enable and beep disable.
RFID module power on icon. The icon appears when the RFID module power is on and
the mobile computer is attempting to read RFID tags.
Use the Attenuation Slide Bar (see
from 0 (full power) to 255 (low power). Drag the Attenuation Slide Bar to optimize tag
reading and to minimize interference. For closer tag use a lower setting and for further
away tag use a higher setting.
Description
Locate Tag on page
Program Tag on page
Clearing the Display on page
Saving Tag Data on page
File Menu on page 5-33 and
Figure 5-28 on page
Applications
5-38.
5-40.
5-31.
5-32.
Mode Menu on page 5-37.
5-35) to set the power range
5-29