Chapter 7. Error Recovery And Troubleshooting; Error Messages - Symbol PDT 6100 Series Product Reference Manual

Error Recovery and Troubleshooting
This chapter provides information to assist in basic trouble analysis and correction for the
PDT 6100, including:

Error messages

t
Troubleshooting start-up failures
t
Troubleshooting Spectrum24 terminals
t
Running the self test function
t
Self test summaries
t
Keyboard test
t
Running memory transfer
t
Scanning problems.
t
Error Messages
If ERR3000 is loaded in the system configuration, the terminal displays the following
messages to indicate error conditions that affect system performance. A message is usually
accompanied by one or more beeps, after which the system returns to its previous status.
The application can change the actual wording of the messages or disable messages. The
messages listed in Table 7-1
further information.
Chapter 7
are representative. Refer to the application's documentation for
7-1