Autoscale:channels - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:AUToscale:CHANnels

Command Syntax
:AUToscale:CHANnels <value>
<value> ::= {ALL | DISPlayed}
The :AUTOscale:CHANnels command specifies which channels will be
displayed on subsequent :AUToscales.
• When ALL is selected, all channels that meet the requirements of
• When DISPlayed is selected, only the channels that are turned on are
Use the :VIEW or :BLANk root commands to turn channels on or off.
Query Syntax
:AUToscale:CHANnels?
The :AUToscale:CHANnels? query returns the autoscale channels setting.
Return Format
<value><NL>
<value> ::= {ALL | DISP}
See Also •
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
:AUToscale will be displayed.
autoscaled.
"Introduction to Root (:) Commands"
":AUToscale" on page 126
":AUToscale:AMODE"
":VIEW" on page 162
":BLANk" on page 130
on page 124
on page 128
Commands by Subsystem
5
129