:DISPlay:PERSistence
Command Syntax
:DISPlay:PERSistence <value>
<value> ::= {MINimum | INFinite}
The :DISPlay:PERSistence command specifies the persistence setting.
MINimum indicates zero persistence and INFinite indicates infinite
persistence. Use the :DISPlay:CLEar or :CDISplay root command to erase
points stored by infinite persistence.
Query Syntax
:DISPlay:PERSistence?
The :DISPlay:PERSistence? query returns the specified persistence value.
Return Format
<value><NL>
<value> ::= {MIN | INF}
See Also
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see
page
658)
"Introduction to :DISPlay Commands"
":DISPlay:CLEar"
on page 210
":CDISplay"
on page 131
Commands by Subsystem
on page 208
5
215