Trunk Access Code - NEC SL2100 Programming Manual

ISSUE 2.0
Level:
IN
Description
Use Program 11-09 : Trunk Access Code to assign the trunk access code. The trunk access code
can be set from 1 ~ 4 digits which is defined to type 3 and 4 in Program 11-01. This is the code
extension users dial to access Automatic Route Selection (ARS/F-Route). The Individual Trunk
Access Code is used when Trunk Group Routing is desired for an outgoing line.
The digit 9 is defined in Program 11-01 as Dial Type ( ) with the Number of Digits Required set to ( ). If you change the
trunk access code in Program 11-09, you must make the corresponding changes in Program 11-01.
Input Data
Item Item
No.
01 Trunk Access
Code (for Type 3)
Programming Manual
Program 11 : System Numbering
Caution!
Input Data
Dial (Up to four digits) Use this program to assign the trunk
access code. This is the code exten-
sion users dial to access Automatic
Route Selection (ARS/F-Route).

11-09 : Trunk Access Code

Description Default
SL2100
Program
11
Related
Program
9 • 11-01 :
System
Num-
bering
• 14-01 ~
07 : Ba-
sic
Trunk
Data
Setup
• 14-05 :
Trunk
Group
• 14-06 :
Trunk
Group
Routing
2-73