Program 15 : Extension, Basic Setup; Basic Extension Data Setup - NEC SL1100 Programming Manual

ISSUE 4.0

Program 15 : Extension, Basic Setup

Level:
SA
Description
Use Program 15-01 : Basic Extension Data Setup to define the basic settings for each extension.
Input Data
Extension Number
Item Item
No.
01 Extension Name
02 Outgoing Trunk
Line Preference
03 SMDR Printout
04 ISDN Caller ID
05 Restriction for
Outgoing Disable
on Incoming Line
07 Do-Not-Call
08 Call Attendant
Busy Message
09 Call Attendant
Answer Message
Programming Manual

15-01 : Basic Extension Data Setup

Input Data
Up to 12 Characters Define the extension/virtual exten-
sion name.
0 = Off Use this option to set the extension
1 = On outgoing Trunk Line Preference. If
enabled, the extension user re-
ceives trunk dial tone when they lift
the handset. The user hears trunk
dial tone only if allowed by Trunk
Access Map programming (Pro-
grams 14-07 and 15-06). Refer to
the Line Preference feature for more
details.
0 = None (Station will Use this option to include or exclude
not be reported in the the extension in the SMDR report.
SMDR print out.)
1 = Yes (Station will be
reported in the SMDR
print out.)
0 = Disabled (CPN is If both Program 15-01-04 and
NOT sent.) 10-03-05 are enabled, the system
1 = Enabled (CPN is includes Caller ID in the Setup mes-
sent.) sage as Presentation Allowed. If
these options are disabled, it is Pre-
sentation Restricted.
0 = Supervise dial de- Enable or disable supervised dial
tection detection for an extension.
1 = Not supervise dial
detection
0 = Off
1 = On
0 ~ 100
(0 = No Setting)
0 ~ 100
(0 = No Setting)
Maximum eight digits
Description Default
Ext. 101 ~ 212 =
No Setting (V3.5
Changed)
SL1100
Program
15
Related
Program
0 14-06
21-02
1
1 10-03-05
20-08-13
0 21-01-15
21-01-16
21-01-17
80-03-01
0 21-01-19
0 11-11-59
40-10-08
0 11-11-60
40-10-09
2-125