To Access The Cycler From Another Cycler - Agilent Technologies SureCycler 8800 Setup And User Manual

3 Getting Started

To access the cycler from another cycler

To access the cycler from another cycler

1 From the Home screen, press Network Control.
2 Press any of the six "Touch to Connect" squares on the screen.
3 Enter the IP address or cycler name of the instrument you want to
4 Press Connect. You will be returned to the Network Control screen and
5 Press the square for the connected instrument. You will be prompted to
6 Enter a valid User Name and Password to take over control of the
30
A new screen will open.
connect to into the IP Address/Cycler field.
the network information and status of the connected instrument will be
displayed in the square.
login to the instrument.
instrument remotely and press Log In. You are now operating the
software for the remotely connected instrument.
Agilent SureCycler 8800 Setup and User's Guide