Step 4. Connect The Instrument To A Power Supply; Step 5. Connect Optional Devices; Step 6. Turn On The Instrument; Step 7. Connect The Cycler To A Network (Optional) - Agilent Technologies SureCycler 8800 Setup And User Manual

Step 4. Connect the instrument to a power supply

The instrument must be connected to a grounded AC outlet.
1 Plug the instrument's power cord into the power connector at the rear
2 Connect the other side of the cable to the outlet.

Step 5. Connect optional devices

If desired, you can connect an optional USB device (such as a keyboard
mouse or memory stick) to the instrument via the USB ports on the front
of the instrument.
1 Plug the USB cable of the device into either USB port on the

Step 6. Turn on the instrument

1 Press the power button located near the bottom left corner on the front

Step 7. Connect the cycler to a network (optional)

1 Plug one end of an ethernet cable into the ethernet port on the back of
2 Plug the other end of the cable into a network port.
Agilent SureCycler 8800 Setup and User's Guide
of the instrument.
instrument.
of the instrument.
You can turn off the instrument any time. You do not need to close
the software before you turn off the instrument.
the instrument.
Step 4. Connect the instrument to a power supply
Installation 2
17