Agilent Technologies SureCycler 8800 Setup And User Manual page 37

Use the following steps to manually generate a new PCR program.
1 From the Home screen, press New Program. The programing screen
2 From the available program steps listed in the Command List on the
3 Add the first step of the program from the Command List to the
4 Enter the necessary settings for the newly added step as prompted.
5 Confirm your settings by pressing OK. You are returned to the
6 Repeat
Agilent SureCycler 8800 Setup and User's Guide
opens.
left side of the screen, determine the order of steps that will make up
the new PCR program.
See "Program Steps in the Commands List"
Program Window using one of the following two approaches:
• Press the command then press the forward arrow button (shown
below).
• Double- press the command.
Both approaches open a new screen in which you can enter the
parameters for the selected step.
programming screen.
step 3 through
program. You can change the order of commands in the Command
Window at any time using the up/down arrow buttons (shown below).
step 5 for each program step to be added to the
PCR Programs
To manually create programs
on page 43.
4
37