Table of Contents
Advertisement
8
Communications
Access the Connection Ports
Access the Connection Ports
The external device connection ports on the 990 Micro GC are located in the top assembly. The
connectors at the rear of the top assembly, from left to right, are RS-232 (COM-1), USB,
Ethernet (LAN), and multiconnector (for digital and analog I/O). See
COM 1, see
Figure 45.
The side of the top assembly features the LCD cable connector and a breakaway which conceals
the COM 2 and COM 3 connection ports. See
Table 28
Figure 46.
The front of the top assembly features two USB connectors. See
Figure 47.
112
Table 27
and
Figure 48
RS-232
(COM-1)
Top assembly rear connection ports
and
Figure 49
on page 114.
LCD cable
connector
Top assembly LCD cable connector and port connection for COM 2 and COM 3
Top assembly front USB ports
on page 113.
USB
Ethernet
Digital and Analog I/O
(LAN)
Figure
46. For details of COM 2 and COM 3, see
COM 2 and COM 3 ports
(inside the breakaway)
USB
Figure
45. For details of
Figure
47.
Agilent 990 Micro GC User Manual
Advertisement
Table of Contents
