Disable Wireless Settings; Encryption - Polycom Pano Administrator's Manual

Enforce Security Code for Every Connections
For enhanced security, you can require Windows Miracast users to enter a security code each time before
they can connect to Pano.
Note the following:
▪ You must enable Pano's Security Code feature before you can use this feature.
▪ This feature applies only to version 1709 and above on Windows 10.
▪ You can't change the Require PIN Every Connection option during an ongoing content mirroring
session.
▪ Updates to the Require PIN Every Connection setting takes about one to five minutes to take
effect. During that time, you can't connect to Pano through Miracast.
▪ When you disable Miracast, the Require PIN Every Connection option is reset to its default value.
Procedure
1. In the system web interface, go to Security > Wireless and Screen Mirroring.
2. Select the Enable Miracast option to enable screen mirroring for Miracast-certified devices.
3. Select Require PIN Every Connection.
It takes about one two five minutes for this change to take effect. During that time, you can't
connect to Pano through Miracast.
Related Links
Disable the Security Code

Disable Wireless Settings

You can disable the wireless features on your system. Wireless features are enabled by default.
Remember the following when disabling wireless features:
▪ Disabling Wi-Fi turns off the Wi-Fi network functionality and screen mirroring with Miracast-certified
devices.
▪ Disabling Bluetooth turns off screen mirroring with AirPlay-certified devices and prevents those
devices and the Polycom Content App from automatically discovering your system. (You can still
connect with the Polycom Content App using the system IP address.)
Procedure
1. In the system web interface, go to Security > Wireless and Screen Mirroring.
2. Specify your preferences:
▪ Clear the Enable Wireless Connectivity check box.
▪ Clear the Enable Bluetooth check box.
Your preferences automatically update.

Encryption

The following table lists the product capabilities that are supported but not necessarily required.
Requirements vary based on the customer environment.
Polycom, Inc.
on page 34
Security
37