Revert To The Default Home Screen Background; Change Network Name; Customizing Your System Status Bar; Display Ip Addresses On System Status Bar - Polycom Pano Administrator's Manual

▪ 3840 × 2160
▪ 2560 × 1440
▪ 1920 × 1080
Changing the background image deletes the old one from the system, unless it's the default Polycom
background image. You can always revert to the default background image.
Procedure
1. Select General Settings > Home Screen Settings.
2. Select Choose File and then select an image from your local disk.
3. Select Upload.
The system prompts you when the image successfully loads.

Revert to the Default Home Screen Background

You can revert the home screen background to the default picture.
Procedure
1. Select General Settings > Home Screen Settings.
2. Select Use Default Background.
3. In the Are you sure? dialog box, select Apply Default.
The system deletes your current background image and replaces it with the default.

Change Network Name

You can give a descriptive name to your networks so users can identify them easily.
Procedure
1. Select General Settings > System Status Bar.
2. Type a name to the right of the desired network.
The maximum name length is 16 characters.

Customizing Your System Status Bar

You can set whether to display the Primary network (LAN) or Secondary network (Wi-Fi) IP addresses on
the system status bar. You can also change the network names.

Display IP Addresses on System Status Bar

You can display the Pano system IP addresses in the system status bar.
Content App users can find and connect to the Pano system using the Pano IP addresses shown on the
system status bar.
Procedure
1. Select General Settings > System Status Bar.
Polycom, Inc.
General Settings
14