Change Network Name; Set The Date And Time - Polycom Pano Administrator's Manual

2. Select Display on system status bar: under the desired network.
Related Links
Configure Monitor Settings

Change Network Name

You can give a descriptive name to your networks so users can identify them easily.
Procedure
1. Select General Settings > System Status Bar.
2. Type a name to the right of the desired network.
The maximum name length is 16 characters.

Set the Date and Time

Change the date and time settings in the system web interface.
Procedure
1. In the system web interface, go to General Settings.
2. Select Date and Time.
3. Configure the following settings (your changes save automatically):
Setting
Date Format
Time Format
Auto Adjust for Daylight Saving Time
Time Zone
Time Server
Primary Time Server Address
Secondary Time Server Address
Current Date and Current Time
Polycom, Inc.
on page 28
Description
Specifies how the date displays.
Specifies how the time displays.
When enabled, the system clock automatically adjusts
for daylight saving time.
Specifies the time difference between GMT and your
location.
Specifies if you want to automatically or manually
configure the system to use a time server. You can also
select Off to manually enter the date and time.
Specifies the address of the primary time server your
system uses when you set Time Server to Manual.
Specifies the address of the time server your system
uses when the Primary Time Server Address doesn't
respond. This is an optional field.
If you set Time Server to Manual or Auto, the system
doesn't display these settings.
If you set Time Server to Off, you can configure
Current Date and Current Time.
General Settings
15