Register With A Provisioning Service; Disable A Provisioning Service - Polycom Pano Administrator's Manual

Procedure
1. In the system web interface, go to General Settings > Provisioning Server.
2. Select Enable Provisioning.

Register with a Provisioning Service

After enabling provisioning, you can register your Pano system with a provisioning service.
Procedure
1. In the system web interface, go to General Settings > Provisioning Server.
2. Select Load Discovered Information.
The registration fields update automatically if your system detects a provisioning server.
3. If your system didn't detect a provisioning server, complete the following fields (contact your
network administrator for help):
Setting
Server Type
Server Address
Domain Name
User Name
Password
4. Select Save.
5. Verify that Registration Status changes from Pending to Registered.
It might take a minute or two for the status to change.

Disable a Provisioning Service

You can disable a provisioning service on the system web interface.
Procedure
1. In the system web interface, go to General Settings > Provisioning Server.
2. Disable the Enable Provisioning setting.
Polycom, Inc.
Description
Specifies the type of provisioning service (for example, RealPresence Resource
Manager).
Address of the system running the provisioning service.
Domain for registering with the provisioning service.
User ID for registering with the provisioning service.
Password for registering with the provisioning service.
Provisioning Service
18