Configure Ipv4 Settings; Configure Ipv6 Settings - Polycom Pano Administrator's Manual

Configure IPv4 Settings

You can configure the IPv4 settings for your system.
Procedure
1. In the system web interface, go to Network > Primary Network.
2. Under the Primary Network section, select Enter IP address manually for the IP Address
option.
3. Configure the settings under IP Address (IPv4) as needed.
Setting
Your IP Address is
Default Gateway
Subnet Mask
4. Select Save.

Configure IPv6 Settings

You can configure the IPv6 settings for your system.
Procedure
1. In the system web interface, go to Network > Primary Network.
2. Under the Primary Network section, select Enter IP address manually for the IP Address
option.
3. Configure the settings under IP Address (IPv6) as needed.
Setting
Enable IPv6
Enable SLAAC
Link-Local
Site-Local
Global Address
Default Gateway
Polycom, Inc.
Description
Specifies the system IP address.
Specifies the default gateway assigned to
your system.
Specifies the subnet mask assigned to your
system.
Description
Enables the IPv6 network stack and makes
the IPv6 settings available.
Specifies whether to use stateless address
autoconfiguration (SLAAC) instead of DHCP
to automatically obtain an IP address.
Displays the IPv6 address used for local
communication within a subnet.
Displays the IPv6 address used for
communication within the site or organization.
Displays the IPv6 internet address.
Displays the default gateway assigned to the
system.
Network Settings
20