DA-CAD 5000
6
You can use the DA-CAD 5000 program to create seam programs on a
PC. The DA-CAD 5000 program is available as additional equipment.
This section only provides an overview of the program steps. A detailed
description is provided in the Operating Instructions for the DA-CAD 5000
program.
Selecting the class
The first step is to select the class.
Fig. 56: Selecting the class
Creating the seam contour
The next step is to draw the seam contour.
Fig. 57: Creating the seam contour
Operating Instructions 911-210 - 04.0 - 11/2016
DA-CAD 5000
85