Transport Belt Replacement - Ricoh SP5 Series Service Manual

June 30, 1998

6.2.6 TRANSPORT BELT REPLACEMENT

[D]
1. Remove the front cover.
2. Remove the lower two screws [A] securing the transport belt assembly [B].
3. Remove the upper four screws [C] securing the transport belt assembly.
4. Bend up the transport belt assembly extension.
5. Pull off the transport belt [D] and replace it.
NOTE: 1) When releasing the transport belt assembly, make sure to remove the
two lower screws first.
2) When installing the transport belt, make sure that the belt runs under the
belt guide spacers [E].
3) When securing the transport belt assembly with the six screws, make
sure to secure the four upper screws first.
[B]
[A]
A806R111.WMF
6-13
DOCUMENT FEEDER
[C]
A806R110.WMF
[E]
A806R112.WMF