Ricoh SP5 Series Service Manual page 377

1 July 1998
Blank Margin
NOTE: If the leading edge/side-to-side registration can not be adjusted within the
specifications, adjust the leading/left side edge blank margin.
1. Check the trailing edge and right side edge blank margins using the Trimming
Area Pattern, and adjust them using the following SP modes if necessary.
Trailing edge
Right edge
Leading edge
Left edge
COPY IMAGE ADJUSTMENTS: PRINTING/SCANNING
SP mode Specification
SP2-101-2 More than 1.0 mm
SP2-101-4 More than 0.5 mm
3 ± 2 mm
SP2-101-1
2 ± 1.5 mm
SP2-101-3
A: Trailing Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Left Edge Blank Margin
6-105
a
`
^
_
A229R634.WMF