System Parameter And Data Lists (Smc Lists) - Ricoh SP5 Series Service Manual

SERVICE PROGRAM MODE
No.
81 Stapler Junction Gate Solenoid
(Finisher)
Positioning Roller Solenoid
82
(Finisher)
83 Not used
84 Mechanical Counter
85 Upper Transport Motor (Finisher)
86 Lower Transport Motor (Finisher)
87 Shift Tray Exit Motor (Finisher)
88 Staple Hammer Motor (Finisher)
89 Punch Motor (Punch Unit)
ADF Output Check (SP6-008)
No.
1 Feed-in Motor (Forward)
2 Feed-in Motor (Reverse)
3 Transport Motor (Forward)
4 Transport Motor (Reverse)
5 Feed-out Motor
6 Exit Gate Solenoid
7 Inverter Gate Solenoid
8 DF Indicators
9 Pick-up Motor (Forward)
10 Bottom Plate Motor

4.2.6 SYSTEM PARAMETER AND DATA LISTS (SMC LISTS)

1. Access the SP mode corresponding to the list that you wish to print.
1) SP5-990-1 : All system parameter list
2) SP5-990-2 : SP mode data list
3) SP5-990-3 : UP mode data list
4) SP5-990-4 : Machine status history data list
5) SP5-990-5 : Copy mode list (UP mode No.10)
6) SP5-990-6 : SP mode data list with a large font size
2. Touch the "Copy Mode" key to access the copy mode display.
3. Select the paper size and press the "Start" key to print the list.
4. After printing the list, exit the copy mode display by touching the "SP Mode"
key.
5. Exit SP mode.
Description
Description
No.
90 Laser Diode
91 Not used
92 Tray Lift Motor (Finisher)
93 Jogger Motor (Finisher)
94 Stapler Motor (Finisher)
95 Stack Feed-out Belt Motor
(Finisher)
96 Shift Motor (Finisher)
97 Stapler Rotation Motor (Finisher)
98 ~ 99 Not used
4-58
June 30, 1998
Description