Ricoh SP5 Series Service Manual page 369

June 30, 1998 PAPER EXIT/DUPLEX UNIT
6.10.6 DUPLEX TRANSPORT SENSORS 2 & 3
[A]
[B]
[C]
[D]
A229R587.WMF
[E]
[G]
[F]
A229R588.WMF
1. Open the front door.
2. Pull out and remove the duplex unit (see Duplex Transport/Duplex Feed Clutch
Removal).
3. Remove the duplex front cover (see Jogger Motor Removal).
4. Remove the cover bracket [A] (2 screws).
5. Remove the center bracket [B] (4 screws, 2 connectors).
6. Remove the jogger fence [C] (1 screw each).
7. Remove the upper duplex cover [D] (4 screws, 1 connector).
8. Remove duplex transport sensor 2 [E] (1 connector).
9. Remove the duplex transport sensor bracket [F] (1 screw).
10. Remove duplex transport sensor 3 [G] (1 connector).
6-97