Punch Unit Installation - Ricoh SP5 Series Service Manual

PUNCH UNIT INSTALLATION (A812)

3.6.2 PUNCH UNIT INSTALLATION

[B]
!
CAUTION
Unplug the copier power cord and remove the 3,000-sheet finisher from the
copier before starting the following procedure.
1. Unpack the punch unit and remove the shipping retainers [A] (4 screws) and [B]
(1 screw).
2. Open the front door and remove the hopper cover [C] (2 screws).
3. Remove the rear cover (2 screws) and remove the transport guide plate [D] (4
screws).
[A]
A812I500.WMF
[C]
3-32
June 30, 1998
[D]
A812I501.WMF