Ricoh SP5 Series Service Manual page 390

SERVICE CALL CONDITIONS
SC360: Hard disk drive error 1
-Definition- [B]
The machine does not detect the connection signal from the HDD.
- Possible causes -
• Poor connection between the HDD and SBICU
• The dc power connector to the HDD is disconnected
• HDD defective
• SBICU defective
SC361: Hard disk drive error 2
-Definition- [B]
The image data stored in the HDD cannot be output properly.
- Possible causes –
• When this SC occurs only once, this problem will be solved after turning the
main power switch off and on.
• When this SC occurs while performing SP4-911-1 (HDD media check), it can
be cured by doing SP4-911-2 (HDD formatting).
• HDD defective
SC362: IMAC (image compression IC) error
-Definition- [B]
An error occurs during image processing in the IMAC, which handles image
compression and image data transmission.
- Possible causes -
• SBICU defective
SC365: Image storage address error
-Definition- [B]
The SBICU receives an image data output request signal for data that is not
stored in memory.
- Possible causes -
• SBICU defective
7-8
June 30, 1998