Ricoh SP5 Series Service Manual page 226

June 30, 1998
Mode No.
(Class 1 , 2 & & & & 3)
4-912 Text/Photo Separation Setting
13 L. Max.
Thresh Level
(Main Scan) –
Half Tone
14 H. Min. Thresh
Level (Main
Scan) – Half
Tone
L. Min. Thresh
15
Level (Main
Scan) – Half
Tone
5x3 Block
16
Thresh Level
– Half Tone
17 Half Tone
Separation
Level
18 Effective
Magnification
Ratio
5-009 Language Selection
5-019 Tray Paper Size Selection
5 LCT
5-024 mm/inch Display Selection
5-104 A3/DLT Double Count
5-106 ID Shift Level
6 ADS Level
Selection
Function
* This SP mode is for designer use only.
* This SP mode is for designer use only.
* This SP mode is for designer use only.
* This SP mode is for designer use only.
* Selects the dot screen detection level.
0. Setting of SP4-921-008 ~015
1. Letter priority – strong
2. Letter priority – weak
3. Standard
4. Photo priority – weak
5. Photo priority – strong
Do not use '0'; this is for factory use only.
* Selects the maximum magnification that can
be used with dot screen detection.
* Selects the operation panel language.
A language card is required except for
English, German and Italian.
After changing the setting for this SP mode,
turn the main power switch off and on.
* Selects the paper size in the optional LCT.
* Selects what unit is used.
After selecting the unit, turn the main power
switch off and on.
* Specifies whether the counter is doubled for
A3/11"x17" paper.
If "1" is selected, the total counter and the
current user code counter count up twice
when A3/11"x17" paper is used.
* Selects the image density level that is used
in ADS mode.
4-33
SERVICE PROGRAM MODE
Settings
0 ~ 255
1/step
30
0 ~ 255
1/step
40
0 ~ 255
1/step
20
0 ~ 15
1/step
2
0 ~ 5
1/step
3
100 ~ 400
1/step
109
A4
LT
B5
0: mm
1: inch
NO
YES
1 ~ 7
1 notch /step
4