Avaya S8730 Installing And Configuring page 59

Figure 5: Connecting the laptop directly to the IPSI
1
cadlipsi KLC 031502
Figure notes:
1. Services laptop computer
2. PCMCIA Network Interface Card (NIC)
Note:
Ensure that you have the password before proceeding.
Note:
Depending on the operating system on the Services laptop computer, you might need to clear
the Address Resolution Protocol (ARP) cache before entering a new IP address. If you enter an
IP address and your computer cannot connect, try clearing the cache.
1. On your laptop computer, click Start > Run to open the Run dialog box.
2. Type command and click OK to open a MS-DOS Command Line window.
3. Clear the Address Resolution Protocol (ARP) cache in the laptop.
4. To log into the IPSI, use SSH and the IP address 192.11.13.6.
For information on how to use SSH, see
server with SSH
Installing and Configuring the Avaya S8700-Series Server
2
on page 87.
3
3. NIC adapter cable (if necessary)
4. CAT5 crossover cable to IPSI
Accessing the command line interface of the
IPSI address configuration
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
4
January 2008
59