Interchanging Servers; Performing An Integrity Check On The Active Server - Avaya S8730 Installing And Configuring

Hide thumbs Also See for S8730:
Table of Contents

Advertisement

Interchanging servers

To interchange the servers to check capability of the standby server to become the active
server:
1. Under Server, click Interchange Servers.
2. Verify the settings in the following fields:
Standby Busied: no
Standby Refreshed: yes
Standby Shadowing: on
Duplication Link: up
Control Network health: X/X/X for both servers, where X is the number of
administered IPSI port networks. For more information, see
translations
3. Click Interchange.
The system displays a confirmation message that the interchange has taken place.
This server is now the active server.
To perform another interchange so that the originally active server returns to being the active
server:
1. Access the server that is now the standby server. See.
2. Repeat the three steps for

Performing an integrity check on the active server

To perform an integrity check on the active server:
1. On the Maintenance Web Interface, under Diagnostics, click Server > Status Summary.
2. Verify the following:
Mode: Active
Server Hardware: okay
Processes: okay
3. Select Server > Process Status.
4. Under Frequency, click Display Once.
5. Click View.
6. Verify all operations are UP.
Installing and Configuring the Avaya S8700-Series Server
on page 51.
Interchanging
servers.
Interchanging servers
Chapter 5: IP interface
January 2008
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S8710S8700 seriesS8720

Table of Contents