S8700-Series Port Connections - Avaya S8730 Installing And Configuring

Chapter 1: Introduction

S8700-series port connections

The network cable connections depend on the type of server, type of memory duplication, and
the type of control network. All cables are CAT5 or better patch cables except for the fiber cable
that interconnects the DAL2 cards for hardware duplication.
For a guide to connect the cables to the servers for hardware duplication on the S8730
Server, see
(S8730)
For a guide to connect the cables to the servers for hardware duplication on the S8720 or
S8710 Server, see
duplication (S8720/S8710)
For a guide to connect the cables to the servers for software duplication on the S8730
Server, see
(S8730)
For a guide to connect the cables to the servers for software duplication on the S8720 or
S8710 Server, see
duplication (S8720/S8710)
14
Installing and Configuring the Avaya S8700-Series Server
Figure 1: Duplication and control network cabling for hardware duplication
on page 15.
,Figure 2: Duplication and control network cabling for hardware
on page 16.
Figure 3: Duplication and control network cabling for software duplication
on page 17.
,Figure 4: Duplication and control network cabling for software
on page 18.
January 2008