S8730 Leds - Avaya S8730 Installing And Configuring

Chapter 8: Installation verification

S8730 LEDs

Figure 7: LEDs on the front panel of the S8730 Server
back panel of the S8730 Server
Figure 7: LEDs on the front panel of the S8730 Server
Figure notes:
1. Active/standby LED
2. Internal health
3. External health
4. NIC 1 (Eth0) link/activity
5. NIC 2 (Eth1) link/activity
Note:
The Active/Standby LED, which is labeled as 1 in
Note:
When pushed, this button has no effect other than to turn off the LED
momentarily. The LED returns to the normal state within a few seconds after the
button is pushed.
76
Installing and Configuring the Avaya S8700-Series Server
on page 77 show the LEDs on the S8730 Server.
POWER POWER
SUPPLY SUPPLY
DIMMS
PROC PROC
FANS
UID
1
2
ms873lef LAO 082707
6. Power on/standby button/system power. Amber means
system shut down, but power still applied. Green means
system on. To turn off the power, press and hold the Power
button for several seconds.
7. Hard Drive LEDs
8. System Insight Display LEDs, which represent the system
board layout.
on page 76 and
PCI
RISER
8
CAGE
DIMMS
INTER
LOCK
OVER
TEMP
I-PPM
1 2
3 5
4 6
Figure
Figure 8: LEDs on the
7
7, is on a push button.
January 2008