Minimizing Print Head Movement - Roland VersaUV LEF2-200 User Manual

Minimizing Print Head Movement

The print time is reduced by restricting the operating range of the print heads. This feature is effective when the
print area or print data has a small width.
Procedure
1.
Press [MENU].
2.
Press [▼] to display the screen shown below.
MENU
SUB MENU
3.
Press [▶].
4.
Press [▼] several times to display the screen shown below.
SUB MENU
FULL WIDTH S
5.
Press [▶].
FULL WIDTH S
FULL
6.
Press [▲] or [▼] to select an item.
FULL WIDTH S
"PRTAREA"
"OFF"
"FULL" (default setting)
7.
Press [ENTER] to confirm your entry.
8.
Press [MENU], then [◀] to go back to the original screen.
MEMO
For print data whose width gradually narrows (e.g., an inverted triangle), even if "FULL WIDTH S" is set to "OFF", the movement
of the print heads may not match the print data. This is to prevent ink-curing failures caused by the print position and is not a
malfunction.
OFF
Adjust the operating range of the print heads to the preset print area.
""OFF"" matches the range of print heads movement to the print data. Movement is limited to
the minimum amount necessary, and this can be expected to yield the fastest printing. When
this feature is used, the time needed for the ink to harden is not constant, and an uneven color
may result.
""FULL"" makes the speed of the movement of the object to be printed on constant at all times
and produces the most stable printing results.
Reducing Print Time
Explanation
3. Optimizing Work Efficiency
87