Setting The Start Timer - Roland VersaUV LEF2-200 User Manual

Managing the Operations Appropriately and Efficiently

Setting the Start Timer

You can set a timer so that the machine finishes starting by the set time.
Point
• Before configuring this setting, you need to set the date and time. For information about how to configure the settings, refer to
"RELATED ITEM" at the end of this section.
• The timer specifies the next start date and time. Setting a regular start time is not possible.
• The timer can be set to a time between 10 minutes from the set date and time, to 23:50 3 days after the set date and time.
• The minutes setting of the timer can be set at 10-minute intervals beginning with 00 minutes. Because setting less than 10 mi-
nutes is not possible, the following is an example of the shortest possible timer setting.
Set date and time
Exam-
ple
Configurable timer setting
Procedure
1.
Press [FUNCTION].
2.
Press [▼] to display the screen shown below.
FUNCTION
TIMER
3.
Press [▶] twice to display the screen shown below.
SET
12/25 11:30
MEMO
Refresh the heads if the following screen is displayed during operation. Afterward, start over from the beginning. Continuing
with operation without refreshing the heads is possible, but print quality may be affected, and deterioration of the print heads
may be accelerated, and is not recommended.
DO HEAD REFRESH
4.
Set the date and time at which the machine will finish starting.
(1)
Press [▲] or [▼] to set the day.
(2)
Press [▶].
(3)
Press [▲] or [▼] to set the hour.
(4)
Press [▶].
(5)
Press [▲] or [▼] to set the minute.
(6)
Press [▶].
The number with the cursor (underline) is the one being set. You can use [◀] and [▶] to switch between the
day, hour, and minute.
MEMO
The start timer includes settings for day, hour, and minute. If the setting is configured at the end of the month, the setting will
include up to 3 days into the following month.
5.
Press [ENTER] to confirm your entry.
6.
When the following screen is displayed, press [▲] or [▼] to set an action to be performed before startup completes.
Startup will complete before the time set with the timer after the action configured here is performed.
ACTION
NONE
92
4. Optimizing Operation Management
09:23
12/03/17:33
12/03/17:50 to 12/06/23:50