Step1: Preparing For The Start Of Daily Operations - Roland VersaUV LEF2-200 User Manual

Printing method

Step1: Preparing for the Start of Daily Operations

Perform a printing test to ensure no dot drop-out or dot displacement occurs. If dot drop-out or dot displacement
occurs, clean the print heads (normal cleaning).
1.
Press the sub power button.
Turn on the sub power to begin the day's work. If using white ink, be sure to mix the ink in the cartridge first.
Procedure
1.
Open the front cover.
IMPORTANT
Be sure to hold the handle of the front cover and open and close it gently.
2.
When using white ink, remove just the white ink cartridge, and shake it 50 times (about 20 seconds).
So that the ink mixes well, shake the ink cartridge horizontally with a stroke length of around 5 cm (2 in.)
from each end of the ink cartridge.
3.
Close the front cover.
4.
Press the sub power button.
Initialization is complete when the following screen appears.
SETUP MEDIA
34
1. Printing Operations