Changing The Range Of Print-Head Carriage Movement - Roland Soljet EJ-640 User Manual


VACUUM POWER
AUTO 90%
A larger value produces a larger suction force. For media that easily becomes loose
due to warping or wrinkling, increasing the suction force may help correct the
0 to 100%
problem. When the media is flimsy and cannot move smoothly, reducing the suction
force may correct the problem.
AUTO
The suction force is automatically adjusted to the optimal level for the media width

Press , then
Description
The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding
to the nature and condition of the media. You can also make this setting in the software RIP. When you have
made the setting in the software RIP, the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO

Changing the Range of Print-head Carriage Movement

Procedure

Press .

MENU
SUB MENU

SUB MENU
FULL WIDTH S

FULL WIDTH S
FULL OFF
SHEET
"SHEET" matches the range of print head movement to the width of the media.
"OFF" matches the range of print head movement to the printing data. Movement
is limited to the minimum amount necessary, and this can be expected to yield the
OFF
fastest output. Note, however, that because the speed of media movement is no
longer constant, colors may be uneven.
"FULL" makes the speed of media movement constant at all times and produces
FULL
the most stable printing result.

Press , then
Accommodating Different Media Types and Conditions
Press or
Press to confirm your entry.
to go back to the original screen.
Press several times to display the screen shown
on the left.
Press .
Press several times to display the screen shown
on the left.
Press .
Press or
Press to confirm your entry.
to go back to the original screen.
to select a value.
to select a value.
4
99