Profile Set Up; Profile Set Up (Ground Drive) - CONCORD 2800 Operator's Manual

3. Operation

3.15 Profile set up

Before operating the cart control system, there are some setup and calibration procedures that must be
done to make sure the seeding performance is correct. If these operations are not complete, seeding
performance and accuracy will not be correct.
IMPORTANT:
The profile setup procedures must be completed or the system will not operate correctly. Complete all
steps. (These steps should be preloaded onto the machine, if not, follow this procedure)

3.15.1 Profile Set Up (Ground Drive)

Upon initial start up, if no profile is loaded you
will be prompted to set one up. Follow these
steps to set up a Ground Drive Amity Air Cart
1. Enter Profile Name (Tank Size GD) GD = Ground
Drive
Machine Type – Air Cart
Toolbar Width – Note the width can be entered in
feet or inches
Select Next (1).
96