Profile Set Up (Hydraulic Drive) - CONCORD 2800 Operator's Manual

3. Operation

3.15.2 Profile Set Up (Hydraulic Drive)

Upon initial start up, if no profile is loaded you will
be prompted to set one up. Follow these steps to
set up a Hydraulic Drive Amity Air Cart
1. Enter Profile Name (Tank Size HYD) HYD =
Hydraulic Drive
Machine Type – Air Cart
Toolbar Width – Note the width can be entered in
feet or inches
Select Next (1).
2. Enter Number of Products (Bins) 2 or 3
2800/3350 = 2 Products
3800/5250 = 3 Products
Select Next (1) to advance to the next screen
after completely this step and each of the following
steps. Select Return (2) to go back and edit a previous
step.
105