Product Bin Lids - CONCORD 2800 Operator's Manual

3. Operation

3.2 Product bin lids

The product bin lids on the air cart compartments
must be correctly closed and sealed for the meters
to supply product correctly.
Periodically check the product bin lids for correct
adjustment and inspect the seal for damage.
To determine whether the product bin lid is
adjusted correctly, watch the product bin lid as the
latch is opened. The product bin lid must tilt a little
toward the latch end. A pull on the latch handle is
required to over-center the latch.
To adjust the hinge end of the product bin lid,
loosen or tighten the jam nuts (1) on the hold
down bar.
Fig. 3
To adjust the latch, loosen or tighten the nuts (2)
on the toggle U-bolt.
In the off season, release the latch to relieve
pressure on the gasket.
51