Setting Test Speed; Refilling Product Bins - CONCORD 2800 Operator's Manual

3.15.8 Setting Test Speed

1. From the home screen press the speed read out
2. A pop up will appear with a field to enter a value.
3. Enter the value you desire

3.15.9 Refilling Product Bins

1. Select Settings:
2. Select System Settings tab:
3. Select Tank Fill Settings
• From this page you can edit the Tank Fill Capacity, Current Tank Level and Alarm settings•
• Enter the Tank Fill Capacity by multiplying tank size (bu) by Product Density (lbs/bu)
• Enter the current tank level based on the amount of product in the bin (lbs)
OR
1. From the Home Screen Select the desired product to fill
2. Select the bin icon on the bottom of the page
• From this page you can edit the Tank Fill Capacity, Current Tank Level
• Enter the Tank Fill Capacity by multiplying tank size (bu) by Product Density (lbs/bu)
• Enter the current tank level based on the amount of product in the bin (lbs)
DO NOT CHANGE THE DENSITY AFTER YOU HAVE CALIBRATED. THE CALIBRATION
NUMBER WILL BE CHANGED
3. Operation
115