Table of Contents
Advertisement
2.1 Introduction
CAUTION:
In some of the illustrations used in this Operator Manual, panels or guards may have been
removed for clarity. Never operate the tractor with these panels and guards removed. If
the removal of a shield is necessary to make a repair, it must be replaced before
operation.
CAUTION:
Read this book in its entirety prior to operating machine. Use only genuine replacement
parts for repairs and/or replacement.
This manual gives the operator the proper instructions needed for operation and maintenance. Read,
understand, and follow these instructions for best machine performance and life. With proper maintenance
and operation procedures, the machine will have better over all performance. Use normally available tools
for maintenance on this machine.
All operators must read and understand this manual before operating this machine. Where possible,
operators who have not operated the machine must receive instruction from an operator who has operated
this machine. Your dealer can give instruction in machine operation. Keep this manual with the machine for
future reference. If the original manual is damaged, order a replacement from your dealer.
See your dealer in for any service problems and adjustments. The dealer is equipped for all service work
and to help with specific applications of the tractor in local conditions.
Left-hand and right-hand are determined by facing the direction the machine will travel when in use.
2.1.1 Units of measurement
Measurements are given in metric units followed by the equivalent in US units. Hardware sizes are given
in millimeters for metric hardware and inches for US hardware.
2.1.2 Replacement parts
To receive prompt efficient service, remember to have the following information:
Correct part description and part number
Model number of the machine
Serial number of the machine
2.1.3 Intended use
This machine is designed solely for use in customary agricultural operations.
Do not use this machine for any application or purpose other than those described in this manual. The
manufacturer accepts no liability for damage or injury resulting from misuse of this machine.
Compliance with the conditions of operation, service and repair as specified by the manufacturer constitute
essential elements for the intended use of this machine.
This machine should be operated, serviced and repaired only by qualified persons familiar with its
characteristics and familiar with the relevant safety rules and procedures.
All generally recognized safety regulations and road traffic regulations must be obeyed at all times.
Any unauthorized modifications performed on this machine will relieve the manufacturer of all liability for
any resulting damage or injury.
2.1.4 Proper disposal of waste
Improper disposal of waste can pollute the environment and ecology. A few examples of potentially
harmful equipment waste can include, but not limited to, items such as oil, fuel, coolant, brake fluid, filters,
battery chemicals, tires, etc.
2. Introduction
38
Advertisement
Table of Contents
Troubleshooting
