3.8 Selecting air stream
In dual chute equipped systems; one can switch air streams for any desired products.
Procedure
Remove the wing nuts (1) from the baffle
1.
slide and the plug.
Remove the baffle slide.
2.
Move the baffle slide into the desired air
3.
stream.
Install the plug and the wing nuts.
4.
Do not use wrench to tighten the wing nuts.
Over tightening will cause failure of the stud.
Move the pressurization tube to the desired
5.
air stream.
If changing air streams frequently, apply a
small amounts of an anti-seize compound to
the studs. This will keep the studs from
seizing and becoming broken.
Fig. 12
3. Operation
60