Lubrication Points; Lubrication And Maintenance Chart; Lubrication Fitting Locations - CONCORD 2800 Operator's Manual

4.1 Lubrication points

See the machine specification for the correct lubricant.
Do not let grease build up on or around parts, especially when operating in sandy soil.
Make sure to clean the lubrication fittings fully before connecting the grease gun.
Watch each lubrication point while lubricating to make sure the lubricant applies correctly.
Check for any loose, missing, or worn parts when lubricating the machine.
Check the lubrication service schedule for the correct lubrication interval.

4.1.1 Lubrication and maintenance chart

Interval
Daily
50 hours
Yearly
Every three years

4.1.2 Lubrication fitting locations

Hinge points
Find five lubrication fittings (1) on the hinge points.
Meter box
Find three lubrication fittings (1) on the meter box.
Procedure
Check the tire pressure
Lubricate the meter box lubrication fittings
Lubricate the driveline and steering lubrication fittings
Lubricate the Hinge point lubrication fittings
Check the wheel bearings
Service the wheel bearings
Fig. 1
4. Maintenance
118