Toro Groundsmaster 5900 Series Service Manual page 87

Fuel Tank Removal (continued)
Fuel Tank Installation
Groundsmaster ® 5900 & 5910
16227SL Rev B
9. Slide the fuel tank out from the left side of the machine.
Note: See Fuel Sender (page 6–109)
10. If necessary, remove standpipes, vent elbow, bushings and fuel sender from
fuel tank.
1. If removed, install standpipes, vent elbow, bushings and fuel sender into
fuel tank (Figure 19).
2. Slide the fuel tank in from the left side of the machine.
3. Position tank hold down (item 24) to fuel tank and machine frame. Secure
hold down with two (2) flange head screws and lock nuts.
4. Route fuel supply and return hoses under clamps in top of tank.
5. Using labels placed during tank removal, correctly connect fuel hoses to the
fuel supply standpipe, fuel return standpipe and the fuel tank vent elbow
fitting. Secure hoses with hose clamps.
6. Connect the fuel sender to the machine wire harness.
7. Position fitting cover to fuel tank and secure with three (3) socket head
screws.
8. Install the front left wheel to the machine (see
9. Add fuel to the tank and prime the fuel system (see
(page 4–18)). Check the fuel system for leaks before returning the machine
to service.
testing information.
Page 4–19 Yanmar Diesel Engine: Service and Repairs
Wheels (page 7–3)).
Prime the Fuel System