Toro Groundsmaster 5900 Series Service Manual page 327

Toro Electronic Controllers (TECs) (continued)
Groundsmaster ® 5900 & 5910
16227SL Rev B
The slave TEC monitors the states of the following components as inputs:
Slave TEC Input Number
IN 1
IN 2
IN 3
IN 4
IN 5
IN 6
IN 7
IN 8
IN 9
IN 10
IN 11
IN 12
When testing for wire harness continuity at the connector for the
TEC, take care to not damage the connector pins with multimeter
test leads. If connector pins are enlarged or damaged during testing,
connector repair may be necessary for proper machine operation.
20
30
40
g288501
Front Deck Raise/Lower Switch − Raise
Front Deck Raise/Lower Switch − Lower
Left Wing Deck Raise/Lower Switch − Raise
Left Wing Deck Raise/Lower Switch − Lower
Right Wing Deck Raise/Lower Switch − Raise
Right Wing Deck Raise/Lower Switch − Lower
IMPORTANT
WIRE HARNESS CONNECTOR FOR TEC
NOTE TAB POSITION
10
50
Figure 206
Page 6–65
Description
Front Deck Position Sensor
Left Wing Deck Position Sensor
Right Wing Deck Position Sensor
PTO Switch
Cruise Control Switch − Enable
Cruise Control Switch − Engage
1
11
21
31
41
Electrical System: Component Testing