Battery Removal (continued)
Groundsmaster
®
5900 & 5910
16227SL Rev B
g288670
1.
Knob (2 per side)
1. Open hood and turn battery−disconnect switch to the OFF position.
2. Remove three (3) flange head screws from each side of the rear bumper as
shown
(Figure
279). Loosen the remaining flange head screws securing the
bumper to the frame and pivot the bumper downward.
3. Loosen the knobs and remove both side shrouds
4. Remove six (6) flange head screws securing rear shroud to frame and
remove rear shroud
5. Remove fasteners that secure battery cover to machine and remove cover
(Figure
282).
6. Loosen and remove the battery cables from the batteries.
7. Remove fasteners that secure battery hold downs.
8. Carefully remove batteries from machine.
g288671
1.
Rear shroud
2
1
Figure 280
2.
Side shroud − LH
(Figure
281).
Figure 281
2.
Flange head screw (6)
Page 6–141
(Figure
280).
1
2
2
Electrical System: Service and Repairs