Front Cutting Deck Lift Cylinder Assembly
Groundsmaster
®
5900 & 5910
16227SL Rev B
Prevent damage when clamping the cylinder's barrel into a vise;
clamp on the clevis only. Do not close vise on barrel.
5. Mount lift cylinder in a vise equipped with soft jaws by clamping on the
barrel clevis.
6. Secure head in barrel with retaining ring.
A. Align retaining ring hole in the head with the access slot in the barrel.
B. Insert the retaining ring hook into the hole and rotate head clockwise until
the retaining ring is completely pulled into the barrel and the ring ends
are covered.
(Figure
127) (continued)
IMPORTANT
Page 5–147
Hydraulic System: Service and Repairs