Manifold Component Specifications; Valve Coil Specifications - Genie GS-3384 Service Manual

January 2013
Oscillate manifold (GS-90) (option)
System relief valve pressure
Float relief valve pressure
Oscillate flow regulator
Generator manifold (option)
Relief valve
Flow rate, maximum
Welder manifold (option)
Relief valve
Hydraulic motor (welder option)
Displacement
Manifold Component
Specifications
Plug torque
SAE No. 2
SAE No. 4
SAE No. 6
SAE No. 8
SAE No. 10
SAE No. 12
Part No. 84793
Valve Coil Resistance
Specifications
3500 psi
241 bar
Note: The following coil resistance specifications
are at an ambient temperature of 68°F / 20°C. As
900 psi
valve coil resistance is sensitive to changes in air
62 bar
temperature, the coil resistance will typically
1 gpm
increase or decrease by 4% for each 18°F / 20°C
3.8 L/min
that your air temperature increases or decreases
from 68°F / 20°C.
3000 psi
Description
207 bar
Proportional valve, 12V DC
4.5 gpm
(schematic item AD)
17 L/min
DO3 valve, 3 position 4 way, 10V DC
(schematic items AG and AK)
270 psi
Solenoid valve, 3 position 4 way
18.6 bar
10V DC with diode (schematic item AH)
Solenoid valve, 2 position 2 way 10V DC
(schematic items CA, CB, CC and CD)
1.28 cu in
21 cc
Solenoid valve, 2 position 3 way
10V DC (schematic item AL)
Solenoid valve, 2 position 2 way
12V DC with diode (schematic item DA)
Solenoid valve, 2 position 3 way
12V DC with diode (schematic items DE and DF)
50 in-lbs / 6 Nm
Solenoid valve, 2 position 2 way
12V DC with diode (schematic item DG)
13 ft-lbs / 18 Nm
Solenoid valve, 2 position 3 way
18 ft-lbs / 24 Nm
10V DC with diode (schematic items EF and EJ)
50 ft-lbs / 68 Nm
Solenoid valve, 2 position 3 way
10V DC (schematic item FC)
55 ft-lbs / 75 Nm
75 ft-lbs / 102 Nm
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice.
GS-84 • GS-90
Section 2 • Specifications
SPECIFICATIONS
Specification
4.1Ω
3.6Ω
7.2Ω
5.5Ω
7.5Ω
10Ω
10Ω
2 - 5
6Ω
7Ω
6Ω